Corn End Mill

Spotlight Exhibits

Description

In modern manufacturing industry, the design and performance of cutting tools are very important, and this Corn End Mill performs well in carbon fiber processing and other fields, bringing efficient and accurate cutting to your processing tasks. It is a cutting tool, made of cemented carbide and coated with surface to provide high strength and stability. It has a unique corn tooth shape, in which the cutting edge is serrated, which is helpful to break chips and is suitable for rough machining of carbon fiber and other materials. In addition, compared with similar end mills, the milling cutter can run a higher chip load, cut chips into smaller parts and put them into the chip removal groove without being stuck.

 

Features

1. Hard alloy material: This Corn End Mill is made of hard alloy material, which has excellent hardness and wear resistance. This makes the tool stable in the cutting process and can achieve efficient cutting on different materials.

 

2. Surface coating treatment: Its surface is coated to provide additional strength and stress dispersion. This treatment not only protects the tool surface from wear, but also enhances its service life.

 

3. Unique shape: The cutter has a unique corn tooth shape, in which the cutting edge has serrations. This design is helpful to break chips and reduce the accumulation problem in cutting process, thus improving machining efficiency.

 

4. Suitable for rough machining: Due to the serrated tooth shape and special design of the tool, it will leave traces on the surface of the workpiece, which will provide convenience for subsequent treatment, so it is suitable for rough machining of difficult-to-machine materials.

 

5. Change the vibration characteristics: Its tooth structure can change the vibration characteristics, usually moving the frequency out of the key area of flutter. This is helpful to improve the stability of the tool and make the machining process more stable.

 

Application

• Carbon fiber: This Corn End Mill performs well in the field of carbon fiber processing. Its unique design and serrated cutting edge can realize rough machining on carbon fiber and other materials, and improve machining efficiency and accuracy.

• Composite material: It is suitable for processing composite materials, and can create traces on the surface of composite materials, which is convenient for subsequent treatment.

• Wood material: The milling cutter is also suitable for rough machining of other hard wood materials, and provides support for processing tasks of special materials.

 

 

Factory

 

 

Product Description

 

 

 

SPECIFICATION	d1	L1	D	L
D3.175*12*D3.175*38L	3.175mm	12mm	3.175mm	38L
D3.175*17*D3.175*38L	3.175mm	17mm	3.175mm	38L
D3.175*22*D3.175*45L	3.175mm	22mm	3.175mm	45L
D3.175*25*D3.175*45L	3.175mm	25mm	3.175mm	45L
D4*17*D4*50L	4mm	17mm	4mm	50L
D4*22*D4*50L	4mm	22mm	4mm	50L
D4*25*D4*50L	4mm	25mm	4mm	50L
D4*32*D4*60L	4mm	32mm	4mm	60L
D6*17*D6*50L	6mm	17mm	6mm	50L
D6*22*D6*50L	6mm	22mm	6mm	50L
D6*25*D6*50L	6mm	25mm	6mm	50L
D6*32*D6*60L	6mm	32mm	6mm	60L
D6*42*D6*70L	6mm	42mm	6mm	70L
D6*52*D6*80L	6mm	52mm	6mm	80L
D6*62*D6*90L	6mm	62mm	6mm	90L
D8*25*D8*60L	8mm	25mm	8mm	60L
D8*32*D8*60L	8mm	32mm	8mm	60L
D8*42*D8*70L	8mm	42mm	8mm	70L
D8*52*D8*80L	8mm	52mm	8mm	80L
D8*62*D8*90L	8mm	62mm	8mm	90L
D10*32*D10*75L	10mm	32mm	10mm	75L
D10*42*D10*85L	10mm	42mm	10mm	85L
D10*62*D10*95L	10mm	62mm	10mm	95L

 

Tolerances
Flute Diameter	Flute Diameter Tolerance	Shank Diameter Tolerance
Φ1.0-Φ2.9	0～-0.02	H6
Φ3-Φ6	-0.01～-0.03
Φ6-Φ10	-0.01～-0.035
Φ10.0-Φ18.0	-0.01～-0.04
Φ18.0-Φ20.0	-0.015～-0.045

 

Application
Circuit Board	HDF	Hard Wood				EVE Sponge	Carbon Fiber Board	Aluminum Alloy
		50HRC	55HRC	60HRC	65HRC
○	○	√	√	√		○	○

 

 

Raw Material List

 

Grade	ISO Code	Chemical Compositions(%)		Grain Size(um)	Physial Mechanical Properites(≥)			Coating
		Wc	Co		Density(g/cm3)	Hardness (HRA)	T.R.S(N/mm2)
YG10X(50HRC)	K30-K40	89	10	0.8	14.43	91.5	2500	TISIN
UF12U(55HRC)	K40	87	12	0.6	14.15	92.3	3900	TISIN
AF501(60HRC)	K05-K10	89	10	0.4	14.1	92.8	3600	NANO BLACK
AF308(65HRC)	K05-K10	91	8	0.3	14	93.8	3800	NANO (BLUE)

 

Detailed Photos

 

 

Corn milling cutter	Cemented Carbide Mill	Solid Carbide cron End Mill

 

Our Advantages

 

1. Good knowledge on different market can meet special requirements.

2. Real manufacturer

3. Strong professional technical team ensure to produce the top quality products.

4. Special cost control system ensure to provide the most favorable price.

5. Rich experience equipment.

 

 

Packaging

 

 

FAQ

 

1.Q: When we receive your machine ,is there any other Accessories we will get?

A: Yes, some easy abrasion spare parts will be provided free in case when some small problems happen.

 

2.Q: Can your products be customized?

A: Yes, we have a professional team which has rich experience in welding equipments,so we'll try our best to satisfy your requirement.

 

3.Q: What's your after-sale service?

A: Some damageable spare parts can be offered free.

 

4. Q: How long is the production cycle?

A: 30-50 days

 

5.Q: What are your terms of payment?

A: T/T or L/C

 

Hot Tags: corn end mill, China corn end mill manufacturers, suppliers, factory, hozly cnc bits, Carbide cutter, straight flute milling cutter, left hand spiral right hand cut end mill, corner radius endmills, Solid Carbide Compression Milling Cutter