1. Be able to measure yourself first
Under normal circumstances, when the factory customizes the aluminum milling cutter, it will first measure the size of the milling cutter needed on the machine tool. Of course, this step usually requires a very professional person to carry out the measurement. The data is relatively accurate. If you want to measure accurate data, you need to ask a professional to measure it. After all, for this unprofessional or no-foundation person, accurate data cannot be measured. Of course, there are also many factories that do not measure before customizing the milling cutter. They will go directly to the company that makes the milling cutter to communicate with the staff, but this is actually more troublesome. For example, if you do not have the approximate size of the measurement, then The company wondered if it could make such a milling cutter. Therefore, try to measure first.
2. Inform the custom company of the data you have measured, do not directly tell others what standard you want
After you measure the data, you can start looking for related companies and manufacturers. But if you are looking for a company, you must provide others with the data you have measured, instead of directly telling others what standard milling cutter you want, because you do not know which standard milling cutter you want. . And it's possible that the standard you think is not the same as the production company's standard. Therefore, you only need to tell others the data you have measured, and the company's staff can naturally judge the standard of the milling cutter based on the data you provide.
3. After confirming the company, confirm the data
If you have already selected a company, then you can ask the staff in that company to confirm the data, because the data measured by unprofessional people is not particularly accurate, and it is not necessarily an aluminum milling cutter customization company. desired data, so you can ask the company's staff to do the measurement confirmation again.
When customizing aluminum milling cutters, it is quite troublesome to choose the right size. The three steps that Noble Company told you today are the normal use steps. You can refer to the above steps. I hope you can Pick out the cutter size that is right for you.
