Knowledge

Platform end mills are mainly used for fine or rough milling, groove milling, removal of a large amount of blanks, and fine milling of small horizontal planes or contours.

It belongs to a kind of integral cemented carbide end mill. The ball end mill is point-contact machining, and the obtained machining surface precision is very high

The whiskers can absorb the energy of alloy crack propagation, and the magnitude of the absorbed energy is determined by the bonding state of the whiskers and the matrix.

The main reasons for the fracture of high-precision milling cutters are improper cutting conditions, and the reasons for the high-precision milling cutter itself

For titanium alloy machining tools, the rake surface finish is required to be good, and the knife must have good rigidity and good plasticity.

Alloy milling cutters are multi-edge cutters, the number of teeth (z) can be changed, there are some factors that can help determine the pitch or number of teeth for different type

Integral type: The cutter body and the cutter teeth are made into one piece.

Cylindrical milling cutter: used for machining planes on horizontal milling machines. The cutter teeth are distributed on the circumference of the milling cutter

Under normal circumstances, when the factory customizes the aluminum milling cutter, it will first measure the size of the milling cutter needed on the machine tool.

Cylindrical milling cutter: used for machining planes on horizontal milling machines. The cutter teeth are distributed on the circumference of the milling cutter

Some people cannot tell the difference between an end mill and a chamfering cutter. In some cases they are used similarly, but that does not mean they are interchangeable.

For machining planes on horizontal milling machines. The cutter teeth are distributed on the circumference of the milling cutter