1. Flat end milling cutter for rough milling, removing a large amount of blanks, fine milling of small horizontal planes or contours;
2. Ball end milling cutter for semi-finishing and finish milling of curved surfaces; small cutters can finish milling small chamfers on steep surfaces/straight walls.
3. The flat end milling cutter has chamfering, which can be used for rough milling to remove a large amount of blanks, and can also finely mill small chamfers on fine flat surfaces (relative to steep surfaces).
4. Forming milling cutters, including chamfering cutters, T-shaped milling cutters or drum cutters, tooth cutters, and inner R cutters.
5. Chamfering cutter, the shape of the chamfering cutter is the same as the shape of the chamfering, and it is divided into milling cutters for rounding and chamfering.
6. T-shaped knife, can mill T-shaped groove;
7. Tooth cutter, milling out various tooth shapes, such as gears.
8. Rough skin cutter, a rough milling cutter designed for cutting aluminum and copper alloys, which can be processed quickly.
There are two common materials for flat milling cutters: high-speed steel and cemented carbide. Compared with the former, the latter has high hardness and strong cutting force, which can increase the speed and feed rate, improve productivity, make the knife less obvious, and process difficult-to-machine materials such as stainless steel/titanium alloy, but the cost is higher, and the cutting force changes rapidly. In the case of easy to break the knife.
